管机banner
FLT-6035ETN Three-chuck Laser Tube Cutting Machine

The bed is welded as a whole and treated by annealing to eliminate internal stress, and then finish machining after rough machining and vibration aging, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The machine is equipped with automatic lubrication device, which adds lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts operate in good condition, which can improve the service life of the guide rails, gears and rack and pinion.

Feature
  • Welding bed

    The bed is welded as a whole and treated by annealing to eliminate internal stress, and then finish machining after rough machining and vibration aging, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The machine is equipped with automatic lubrication device, which adds lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts operate in good condition, which can improve the service life of the guide rails, gears and rack and pinion.

  • Automatic Bundle Loader

    Fully automatic intelligent clamping arm to achieve efficient loading at any time.
    Facing down workpiece partitioning with ease, scrap separation and more cost reduction.

  • CNC clamping system

    The chuck is divided into 3 groups of pneumatic chucks, front, middle and rear, all 3 groups are driven by servo motor to move and rotate synchronously in Y-axis direction. Under the logic action set by the system, it can realize the pulling type cutting of the pipe, which can greatly improve the cutting accuracy and can conditionally realize the zero tail material cutting (depending on the workpiece cutting size and specific cutting process).

Product Specification
NO. Item Parameter Unit
1 Maximum cut pipe length 0~6000 (more than 2.8m need to customize the front joint)

mm

2 Cut pipe diameter 15~230(external circle of workpiece

mm

3 Minimum tail material ≥0 (related to workpiece length and actual cutting)

mm

4 X, Y, Z axis positioning accuracy ±0.05/1000mm

mm

5 X, Y, Z axis repeat positioning accuracy ±0.03/1000mm

mm

6 Acceleration speed 1g

m/s²

7 Max. running speed 75

m/min

8 Chuck load weight 250

kg

9 Max. speed of chuck 120

rpm

10 Weight of loading machine Approx. 6500

Kg

11 Main machine shape (length, width and height) Approx. 12435×1940×2400

mm

12 Laser power ***

w

13 Control system Pachu 5000A

 

14 Power of the whole machine ***

Kw

15 Power supply requirements

380v/50Hz±10%

 
Sample
Send Us A Message